AAP audio ASW 218

Dual-driver, direct-radiator subwoofer
2 x 18” (460mm) drivers with 4” (100mm) voice coils
Water resistant cones
Very high output capability
Large ports for reduced air noise
Zinc plated mild steel grille with powder coated finish
Plywood cabinets with polyurea coating
Operating temperature -20°C to +70°C
Environmentally tested to meet IP24
Flying points with fixings made from stainless steel
Black or white standard colour options

The AAP audio ASW 218 achieves the ultimate in subwoofer performance for the most prestigious CDD Series applications – delivering very high output levels and superb transient performance with minimal distortion. With an operating range of 35Hz-150Hz ± 3dB, it houses dual 18” long-excursion (460mm)/4” (100mm) voice coil drivers with water-resistant cones and triple roll surrounds. Each driver is rated to handle 1000 watts AES, and has a magnet structure and suspension engineered for maximum linear excursion.

Type Dual-driver, direct radiating subwoofer.
Frequency Response (1) 35Hz-150Hz ± 3dB-10dB @ 30Hz
Driver 2 x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone
Rated Power (2) 2000W AES, 8000W peak
Sensitivity (10) 108dB
Maximum Spl (9) 138dB continuous, 144dB peak (half space).
Nominal Impedance
Dispersion (-6Db) Omnidirectional
Crossover 80-120Hz active
Enclosure 330 litre, Exterior grade Plywood, Flying points with fixings made from stainless steel.
Finish Black or white Poly Urea coating.
Protective Grille Black or white zinc plated mild steel grille with powder coated finish.
Environmental Rated at IP24
Connectors Low profile 20A push-lock. weatherproof input panel cover with cable gland.
Pin Connections Left to right: Input+, Input -, Link -, Link+
Dimensions (W) 1085mm x (H) 530mm x (D) 780mm*(W) 42.7ins x (H) 20.9ins x (D) 30.7ins** – 905mm/35.6ins with wheels
Weight 85kg (187.4lbs)