AAP audio AKP-12

The AKP series is 2way Full Range Loudspeaker System. AKP series of premium loudspeakers designed specially for KTV installations.

AKP precision engineered crossover for the optimal power response and Performance in the vocal midrange region.

The AKP series consists of 10″,12″,13.5″passive full-range loudspeakers and 18″subwoofer in its portfolio. the AKP series loudspeakers deliver you with all the vocal and acoustics required for an ultimate karaoke experience.

Key Features:

2″high-power capacity with 3″ Aluminum VC LF drivers.

1.75″VC compression driver.

Enclosure constructed of 15 mm plywood.

80°x 50°coverage pattern for even and smooth response.

Precision engineered crossover for optimal power response and performance in the vocal midrange region.

Single position pole socket for applications pole mounting.

Applications:

Karaoke sound reinforcement

Bar and club live or pre-recorded sound reinforcement

High-performance satellite speaker for use with su bwoofers

 

Type Compact, high-output, Coaxial Differential Dispersion passive two-way system
Frequency Response (5) 62Hz-20kHz ± 3dB-10dB @ 50Hz
Driver LF: 12” (300mm)/2.5” (63.5mm) voice coil, long excursion, shared ferrite motor system with HFHF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
Rated Power (2) 300W AES, 1200W peak
Sensitivity (8) 97dB
Maximum Spl (9) 122dB continuous, 128dB peak
Nominal Impedance
Dispersion (-6Db) 110˚-60˚ horizontal, 60˚ vertical (user-rotatable)
Crossover 1.9kHz passive
Enclosure 38 litre, composite material
Finish Black or white as standard
Protective Grille Zinc plated mild steel with powder coated finish and weatherised backing
Environmental Rated at IP54
Connectors Low profile 20A push-lock, weatherproof input panel cover with cable gland
Pin Connections Left to right: Input+, Input -, Link -, Link+
Fittings 6 x M8 inserts for wall bracket10 x M8 fly points
Dimensions (W) 360mm x (H) 571mm x (D) 350mm(W) 14.2ins x (H) 22.5ins x (D) 13.8ins
Weight 19.8kg (43.65lbs)

 

ACOUSTICAL
Type Compact, Differential Dispersion™, powered two-way system
Frequency Response (1) 65Hz-18kHz ± 3dB-10dB @ 55Hz
Maximum Spl @ 1M 125dB continuous, 131dB peak
Drivers DRIVERS
LF 12″ (300mm)/3″ (75mm) voice coil, long-excursion, neodymium magnet driver
HF 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome, neodymium magnet compression driver
Dispersion Differential Dispersion: 110-60° horizontal, 60° vertical
AUDIO INPUT
Connectors Female XLR input, male XLR link output
Analogue Input Impedance 20kΩ balanced to ground
Maximum Analogue Input Level 6.15Vrms (+18dBu), over voltage protected
Aes/Ebu Impedance 110Ω balanced, receive and transmit termination
Internal Processing Multi-channel DSP, programmable via network 8 PEQ/shelving filters Up to 48dB/Oct HPF Vanishing Point™ FIR crossover filters Up to 1 second of delay Preset selection via rear panel switch
NETWORK
Connectors IP68 rated 8-way, quick-release type
Protocol U-NET
Pc Connection Micro USB or via U-NET and Merlin controller
Amplifier Module AMPLIFIER MODULE
Type 2 channel switch-mode, class D
Continuous Output Power 1050W
Average Efficiency

85%

Cooling Internal fan Temperature controlled external fan
Maximum Ambient Temperature 45°C (113°F) for full output
POWER SUPPLY
TYPE Switch mode, fixed frequency with PFC
Ac Input Operating Range 100 – 240V ~ AC, 50 – 60Hz
Ac Overvoltage Tolerance 400V AC
Power Factor > 0.95
Nominal Power Consumption 200W
Mains Connector Neutrik® Powercon True1
GENERAL
Enclosure Extensively braced multi-laminate birch ply
Finish Textured black PU coating
Protective Grille Black HEX perforated steel, Declon® backed
Fittings Top hat for pole mounting 15 x M8 threaded inserts Two side pocket handles Optional weather protection cowl
Ip Rating IP 25 (with weather protection cowl)
Dimensions (W) 360mm x (H) 571mm x (D) 384mm (503mm with cowl)(W) 14.2in x (H) 22.5in x (D) 15.1in (19.8in with cowl)
Weight 26kg (57.2 lbs)