AAD KM-410

rofessional speakers for KARAOKE – MUSIC
* KM10 Sparay speaker with Driver and speaker crossover is specially made for Karaoke

* Speaker KM10 Sparay has ribbed fabric speaker, withstands great sound intensity, stability and durability, not crumbly like karaoke speakers with sucking ribs or cracking socks like speakers using rubber tendons

* KM10 Sparay Speaker with Paper Diaphragm for warm, clear and soft singing

* KM10 Sparay speakers have vents located on the sides that allow them to be hung close to the wall, no need to be hung from the wall like speakers with rear vents

* KM10 Sparay speaker has 2 speaker positions (on the roof, and behind) which is very convenient for installation, in addition, there is also a speaker jack on the bottom which is very convenient when used mobile in combination with the stage speaker stand.

* Speaker AAD K10 KM10 Sparay has high sensitivity (92bd) and compatibility with very high amplifiers – Very easy to match with all types of amplifiers, even those with low power from 20w – 300w

*The frequency response of the speaker KM10 Sparay Speaker is very wide (from 50 Hz – 20 KHz ), will give a fuller sound, the KM10 Sparay Speaker will show all the sound ranges and types of instruments played in The orchestra also helps the singer express his full voice when singing the low notes and high notes that the speakers with a narrow frequency response can not show.

* KM10 Sparay speaker has a cabinet made of MDF, nearly 2 cm thick: the result is a more durable speaker, a stronger sound than karaoke speakers whose enclosure is made of pressed sawdust wood on the market today.

* KM10 Sparay Speaker has a larger capacity than other speakers of the same level (price and speaker diameter), so KM10 Sparay Speaker has stronger sound, better ability to endure sound into large capacity, ensuring never to be shy ( sound broken) when singing loudly, singing loudly
* Speaker AAD K10 has a ribbed fabric speaker, withstands high sound intensity, stability and durability, not crumbly like karaoke speakers with sucking ribs or cracking socks like speakers using rubber ribs

* AAD K10 speaker with Paper Diaphragm for warm, clear and soft singing

* The AAD K10 speaker has Air vents located on the sides that allow the speaker to be hung close to the wall, no need to hang it away from the wall like speakers with rear vents

* Speaker AAD K10 has 2 positions to hang speakers (on the roof, and behind) which is very convenient for installation, in addition, there is also a speaker hole at the bottom that is very convenient to use in combination with the stage speaker stand.
* AAD K10 speakers have high sensitivity (93bd) and very high compatibility with amplifiers – Very easy to match with all types of amplifiers, even those with low power from 20w – 300w

*The frequency response of the speakers The AAD K10 speakers are very wide (from 50 Hz – 20 KHz), which will give a fuller sound, the AAD K10 speakers will show all the audio ranges and types of musical instruments. playing in an orchestra also helps the singer express his full voice when singing the low notes and high notes that the speakers with a narrow frequency response can not show.

*AAD K10 speakers have a cabinet made of MDF wood, nearly 2 cm thick: the result is a more durable speaker, a stronger sound than karaoke speakers whose enclosure is made of pressed sawdust wood on the market today.

* AAD speakers have a larger capacity than other speakers of the same level (price and speaker diameter), so AAD K10 speakers are stronger, better able to endure large-capacity sound, ensuring never to be shy sound broken) when singing loudly, singing loudly

* AAD KM10 has a very wide sound coverage = 180 degrees (rarely karaoke speakers have it) thanks to the arc-shaped front speaker design, the treble speakers are directed to both sides to create an expanded sound, listeners and singers will see the sound evenly in all positions in the singing room, not the loud and small listening places like other common karaoke speakers, and at the same time limit the howling of the microphone.

AAD KM-410

Acoustical
Power Response
180º Horizontal Axis :
50Hz -20KHz +/- 3dB
Sound-field coverage : 180º Horizontal x 60º Vertical
Impedance : 6 OHM
Maximum power handling : 300 watt
Sensitivity: 93 dB
Low Frequency Units : 1x 10″ high excursion paper cone, rubber surround 50mm/4 layer copper/Kapton voice coil, high power vented magnet assembly
High Frequency Units : 4 x 3.5″paper cone units Edgewound aluminum Ribbon/Kapton voice coil. Ferrofluid damped and cooled motor assembly
Crossover network : LF units direct coupled, HF filter passive 12 dB/Octave@2KHz, High current air core inductors, low loss polypropylene capacitors.
Enclosure : Acoustic – low frequency 4th order vented alignment
Construction – PVC clad 0.75″ thick MDF panels
Perforated steel grille
Dimensions
(W x D x H) :
18.1 x 11.55 x 13.2(inch)
460 x 293 x 336 (mm)
Weight (per speaker) : 31 lbs/14Kg

– PROFESSIONAL  SPEAKER  

Acoustical
Power Response
180º Horizontal Axis :
50Hz -16KHz +/- 3dB
Sound-field coverage : 180º Horizontal x 60º Vertical
Impedance : 8 OHM
Maximum power handling : 500 watt
Sensitivity: 93 dB
Low Frequency Units : 1x 10″ high excursion paper cone, rubber surround 50mm/4 layer copper/Kapton voice coil, high power vented magnet assembly
High Frequency Units : 4 x 3.5″paper cone units Edgewound aluminum Ribbon/Kapton voice coil. Ferrofluid damped and cooled motor assembly
Crossover network : LF units direct coupled, HF filter passive 12 dB/Octave@2KHz, High current air core inductors, low loss polypropylene capacitors.
Enclosure : Acoustic – low frequency 4th order vented alignment
Construction – PVC clad 0.75″ thick MDF panels
Perforated steel grille
Dimensions
(W x D x H) :
18.1 x 11.55 x 13.2(inch)
460 x 293 x 336 (mm)
Weight (per speaker) : 31 lbs/14Kg